Materials Shower tray / Cladding surfaces

Forma
Material for shower tray and cladding panels
TECHNICAL DATA SHEET

DESCRIPTION

Forma shower trays are made of resins and natural mineral components. Gelcoat is applied directly into the mold and then covered with resin of the same color. In this way a thermofusion occurs between Gelcoat and resin which guarantees a high quality finish. With this production system we obtain a finishing thickness of 900 Microns – 1,250 g / m2

CLEANING

The product is made with materials that allow for quick cleaning and hinder any bacteria deposits on the surface. Use specific products available on the market for cleaning. Use a soft cloth for all cleaning, never use abrasive wipes. Do not clean with alcohol, acids, nail polish or paint remover or other aggressive detergents. Do not use calcium oxide or hair dye, given the high concentration of methylene. The table in the catalogue shows the resistance characteristics of the various products.

FORMA FINISHES

See the entire gallery
Tecnotek
Material for shower tray and cladding panels
TECHNICAL DATA SHEET

DESCRIPTION

Tecnotek is a noble material composed of 100% acrylic resins which gives the possibility to create shower trays of various shapes. Thanks to Tecnotek, you can have the same material inside the bathroom both on the plate and on the top of the cabinet, in order to create a unique and inimitable color harmony.

CLEANING

Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or sponge. Rinse withwarm water on a soft cloth and dry using a soft cloth.

STAINS OF HARD WATER SOAP OR MINERAL PRODUCTS
Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF® anti-limescale). Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.

OTHER STAINS MARKES, LIPSTIC, etc.
Clean using a non-abrasive ammonia detergent. Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.

PERSISTENT STAINS
Use an abrasive detergent (e.g. VIM®, AJAX®) on an abrasive sponge (e.g. SCOTCH-BRITE®). Rinse with warm water on a soft cloth and dry using a soft cloth.

TECNOTEK FINISHES

See the entire gallery
Corian®
Material for shower tray
TECHNICAL DATA SHEET

DESCRIPTION

Resistant
DuPont TM Corian® is easy to maintain and extremely durable. It does not split or flake. It tolerates daily use well and can with- stand most of the knocks, scratches and cuts to which surfaces in heavily used areas are subjected. Corian® has been tested to ascertain the mechanical, thermal, electrical and other properties of its surface. For the results of these specific tests and for more detailed information about its other physical properties, please consult the online datasheet at www.corian.it.

Hygienic
DuPontTM Corian® is a non-porous material. It is compact throughout and can be installed without any joins, making the surface extremely hygienic. Corian® surfaces do not allow fungi and bacteria to grow. Corian® has been certified by an independent laboratory as a hygienic material according to international standard DIN EN ISO 846.

Easy to repair
Surfaces in DuPontTM Corian® can be restored to their original beauty using a normal, mild, abrasive detergent and an abrasive sponge.

Non-toxic
Du- Pont TM Corian® is an inert and non-toxic material. It does not release gases when exposed to normal temperatures. When it burns, it releases carbon oxides only. The smoke it produces has a limited optical density and does not contain toxic halogenated gases.

Full-bodied colours
The colours and decorative patterns run through the full thickness of the material and are therefore not subject to wear. DuPontTM Corian® is a solid material and does not split or flake.

Invisible joins
Bonding is invisible with this material and the overall effect is that of a continuous surface without any joins.

Ecological
DuPont TM Corian® is produced in compliance with strict regulations to limit waste and energy consumption at every stage of the production process. The material, adhesives and sealants used for installation produce low emissions of volatile organic compounds (VOC) and have been certified as GREEN GUARD Indoor Air Quality Certified®.

SHOWER TRAY MODELS
CLEANING

The product is made with materials that allow for quick cleaning and hinder any bacteria deposits on the surface. Use specific products available on the market for cleaning.

To clean, use normal bathroom cleaning products such as, Cif® and Bleach. Do not use cleaning products containing solvents thinners, and turpentine. To remove any scratches caused by use and restore the original appearance of the surface simply smooth the surface with an abrasive sponge such as scotch-brite or thin abrasive paper and then polish using a soft cloth.

CORIAN® FINISHES

See the entire gallery
Zeroquattro – Acrylic
Material for shower tray
TECHNICAL DATA SHEET

DESCRIPTION

A thermal material, pleasant in contact with the body and bright to the eye. Acrylic surfaces are smooth and non-porous, non-slip, resistant to scratches and bumps and easy to maintain.

SHOWER TRAY MODELS
CLEANING

The product has been constructed with materials that allow for quick cleaning and hinder any bacteria deposits on the surface.
Use specific products available on the market for cleaning.

• Use a soft cloth for all cleaning, never use abrasive wipes.

• Never use powder detergents; use only liquid cleaners such as Svelto or Nelsen.

• Do not use acetone, ammonia or products containing these substances as this will damage the product beyond repair. The same goes for products containing formic acid or formaldehyde.

• To remove stains, apply Svelto, Nelsen according to their application instructions and rub with
a soft cloth.

• To remove any limescale deposits on the surface, rub with a cloth dampened with lemon or vinegar, preferably heated.

• Use a normal polish (also used to polish car chassis) to restore shine to acrylic surfaces.

ACRYLIC FINISHES

See the entire gallery
Request information

Fill in the form for any further information about our products