Rio / Calle (available two-tone) / Move (available two-tone)

Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or sponge. Rinse withwarm water on a soft cloth and dry using a soft cloth.

STAINS OF HARD WATER SOAP OR MINERAL PRODUCTS
Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF® anti-limescale). Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.

OTHER STAINS MARKES, LIPSTIC, etc.
Clean using a non-abrasive ammonia detergent. Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.

PERSISTENT STAINS
Use an abrasive detergent (e.g. VIM®, AJAX®) on an abrasive sponge (e.g. SCOTCH-BRITE®). Rinse with warm water on a soft cloth and dry using a soft cloth.

Skill e Skill-up

Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or sponge. Rinse withwarm water on a soft cloth and dry using a soft cloth.

STAINS OF HARD WATER SOAP OR MINERAL PRODUCTS
Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF® anti-limescale). Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.

OTHER STAINS MARKES, LIPSTIC, etc.
Clean using a non-abrasive ammonia detergent. Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.

PERSISTENT STAINS
Use an abrasive detergent (e.g. VIM®, AJAX®) on an abrasive sponge (e.g. SCOTCH-BRITE®). Rinse with warm water on a soft cloth and dry using a soft cloth.

Resistant
DuPont TM Corian® is easy to maintain and extremely durable. It does not split or flake. It tolerates daily use well and can with- stand most of the knocks, scratches and cuts to which surfaces in heavily used areas are subjected. Corian® has been tested to ascertain the mechanical, thermal, electrical and other properties of its surface. For the results of these specific tests and for more detailed information about its other physical properties, please consult the online datasheet at www.corian.it.

Hygienic
DuPontTM Corian® is a non-porous material. It is compact throughout and can be installed without any joins, making the surface extremely hygienic. Corian® surfaces do not allow fungi and bacteria to grow. Corian® has been certified by an independent laboratory as a hygienic material according to international standard DIN EN ISO 846.

Easy to repair
Surfaces in DuPontTM Corian® can be restored to their original beauty using a normal, mild, abrasive detergent and an abrasive sponge.

Non-toxic
Du- Pont TM Corian® is an inert and non-toxic material. It does not release gases when exposed to normal temperatures. When it burns, it releases carbon oxides only. The smoke it produces has a limited optical density and does not contain toxic halogenated gases.

Full-bodied colours
The colours and decorative patterns run through the full thickness of the material and are therefore not subject to wear. DuPontTM Corian® is a solid material and does not split or flake.

Invisible joins
Bonding is invisible with this material and the overall effect is that of a continuous surface without any joins.

Ecological
DuPont TM Corian® is produced in compliance with strict regulations to limit waste and energy consumption at every stage of the production process. The material, adhesives and sealants used for installation produce low emissions of volatile organic compounds (VOC) and have been certified as GREEN GUARD Indoor Air Quality Certified®.

Sensual

The product is made with materials that allow for quick cleaning and hinder any bacteria deposits on the surface. Use specific products available on the market for cleaning.

To clean, use normal bathroom cleaning products such as, Cif® and Bleach. Do not use cleaning products containing solvents thinners, and turpentine. To remove any scratches caused by use and restore the original appearance of the surface simply smooth the surface with an abrasive sponge such as scotch-brite or thin abrasive paper and then polish using a soft cloth.

A thermal material, pleasant in contact with the body and bright to the eye. Acrylic surfaces are smooth and non-porous, non-slip, resistant to scratches and bumps and easy to maintain.

Minerva / Bolla / Bolla Sfioro / Bolla Q / Bolla Q Sfioro / Bolla R / Bolla R Sfioro / Mode / Era / Eva / Zaphiro / Oasy / Duo / Ondaria / Gamma / Igloo / Ego / Diva / Nova / Nova Plus

Use specific products available on the market for cleaning.

• Use a soft cloth for all cleaning, never use abrasive wipes.
• Never use powder detergents; use only liquid cleaners such as Svelto® or Nelsen®.
• Do not use acetone, ammonia or products containing these substances, as this will damage the product beyond repair. The same goes for products containing formic acid or formaldehyde.
• To remove stains, apply Svelto®, Nelsen® according to their application instructions and rub with a soft cloth.
• To remove any limescale deposits on the surface, rub with a cloth dampened with lemon or vinegar, preferably heated.
• To give acrylic surfaces a shine, use a normal ‘polish’ (also used to polish cars).

Ecomalta surfaces are highly resistant, refractory to dirt and stains, as well as being highly waterproof.

Minerva / Bolla Sfioro: bathtub made of acrylic with eco-malta panelling.

Cleaning an Ecomalta surface is quick and easy: use a normal dry cloth to dust, a damp cloth or sponge with a solution of warm water and vinegar or neutral (non-aggressive) detergents to remove any stains. Aggressive cleaning agents are always inadvisable: avoid using alcohol, acetone, solvents and similar.

Bolla R / Bolla R Sfioro / Bolla Q Sfioro: bathtub made of acrylic with Fenix panelling.

Use a soft cloth for all operations and never abrasive wipes.
Never use powder detergents, alcohol or acetone, as these will irreversibly damage the material; use only liquid detergents free of alcohol and ammonia.
To remove any lime deposits on the surface, wipe with a soft cloth soaked in lemon or vinegar, preferably heated.
To avoid limescale stains on taps, simply wipe them dry after use.

A material that is similar to natural stone.
It is made up of natural minerals and high-resistance resins, and creates state-of-the-art solid surfaces.

Bolla R / Bolla R Sfioro / Bolla Q Sfioro: bathtub made of acrylic with Solid Surface panelling.

To ensure the quality of the product, always dry the environment after each use.
To speed up the drying process, we recommend leaving the door open for better ventilation.
Use a soft cloth for all operations and never abrasive wipes.
Never use powder detergents, alcohol or acetone, as these will irreversibly damage the material; use only liquid detergents free of alcohol and ammonia.
To remove any lime deposits on the surface, wipe with a soft cloth soaked in lemon or vinegar, preferably heated.
To avoid limescale stains on taps, simply wipe them dry after use.

The bathtub is made of acrylic with the possibility of glossy and matt lacquered panelling. Acrylic is a thermal material, pleasant in contact with the body and bright to the eye. Acrylic surfaces are smooth and non-porous, non-slip, resistant to scratches and bumps and easy to maintain.

Minerva / Mode / Era / Eva: bathtub made of acrylic with glossy or matt lacquered panelling.

Remove excess dust or dirt stains with a soft microfibre cloth using mild detergents or specific detergents for lacquered surfaces.

Never use abrasive sponges, ammonia, corrosive products, bleach and limescale removers, as they may irreversibly damage the lacquer.

Always rinse all surfaces and dry them immediately with a microfibre cloth (air drying is not recommended).