The Tecnotek Flat Plus shower tray can be installed flush with the floor, floorstanding or on top of the floor covering. For floorstanding, there is also a version with a rim on the sides of the tray to prevent water splashes.
Tecnotek Flat Plus
Tecnotek is a prestige material made up 100% of acrylic resins that makes it possible to create shower trays in various shapes. By using Tecnotek, you can have the same material for the tray as for the top of the units in your bathroom, which creates a single, inimitable chromatic harmony.
Standard sizes and made to measure
Easy to clean
New-generation drain plug
Floorstanding - Flush with floor - On top of floor covering
L1 x L2
L1 from 70 to 100
L2 from 200 to 240
H. 2.5 cm
G01 – White
G02 – Cream
G03 – Earth
G04 – Light Grey
G05 – Dark Grey
Clean the surface using lukewarm water and a delicate detergent. Use a soft, damp, non-abrasive cloth or sponge. Rinse the surface thoroughly then dry with a soft cloth.
LIMESCALE, SOAP OR MINERAL PRODUCT STAINS
Clean using a limescale remover (e.g. vinegar, VIAKAL®, CIF® limescale remover). Finish by rinsing with lukewarm water and a soft cloth. Then dry with a soft cloth.
OTHER TYPES OF STAINS SUCH AS FELT TIP, LIPSTICK, ETC.
Clean using an ammonia-based product (e.g. CIF® ammonia). Finish by rinsing with lukewarm water and a soft cloth. Then dry with a soft cloth.
Use an abrasive detergent (e.g. VIM®, AJAX®) and an abrasive sponge. Finish by rinsing with lukewarm water and a soft cloth.
Fill in the form for any further information about our products