Mineraltek is 75% natural mineral fillers (calcium carbonates and alumina trihydrate) and 25% polyester resin. The enamel film used to cover the surface is a polyester acrylate, which provides excellent resistance properties. Its aesthetic, mechanical and chemical characteristics make this material perfect for bathroom furniture and furnishings in public spaces. Mineraltek is a highly versatile material that can take the form of basins, tops, and base units.
Available for top and top with built-in basin.
Mineraltek requires frequent cleaning to protect its original qualities and prevent signs of wear. Some aggressive chemicals can damage Mineraltek surfaces. Product care is quick and easy. Most stains, limescale and dirt that may deposit on the surface can be removed with a damp cloth or non-abrasive sponge, and a standard, non-abrasive detergent. Rinse the surface thoroughly after cleaning. Avoid abrasive detergents and sponges. Do not use metal scrapers. This product is heat-resistant. However, avoid placing very hot objects or draining boiling liquids on the surface. Do not use aggressive chemicals such as acetone, trichloroethylene, solvents, acids or strong alkalines. Some substances such as ink, cosmetics and dye may release colourants on the surface; avoid contact with these substances. Do not rest lit cigarettes on the surface. Do not use cut directly on the surface.
K01 – Matt White
K02 – Glossy White
Minimal is composed of natural mineral fillers and polyester resin. The enamel film used to cover the surface is a polyester acrylate, which provides excellent resistance properties.
Available for top and top with built-in basin.
Frequent cleaning of Minimal surfaces ensures the maintaining of its original beauty and prevents signs of wear over time.
To remove stains, limescale and dirt that normally settle on the surface, simply wipe with a damp non-abrasive cloth or sponge and common non-abrasive detergents. After cleaning, rinse the surface well.
This product has good heat resistance; however, avoid placing hot objects on the surface.
The use of aggressive chemical solvents such as acetone, trichloroethylene, and acids is not recommended.
K01 – Matt White
K02 – Glossy White
Tactile
Pleasant to the touch, similar to a natural surface, this warm material turns direct contact an
unexpected surprise.
Eye-catching
Fluid forms and the absence of any joints create unique visuals, and the surfaces flow in a continuum.
Hygienic and easy to clean
Surfaces can be cleaned with a soft damp cloth in most cases. For more stubborn dirt, use a mild detergent and an abrasive sponge. The acrylic resin is food-safe.
Long-lasting
The colour does not change with natural or artificial light. It is highly resistant to stains, scratches, and mould. As a compact, non-porous material throughout, it is resistant to external agents and easy to clean.
Easy to repair
As a highly compact, uniform material throughout, even significant surface damage (such as incisions caused by heavy sharp/pointy objects falling onto the surface) can be removed with a delicate, abrasive action. To repair substantial damage, also polish the surface. Deeper or more extensive damage caused by improper use can be repaired on-site by a spe- cialist, without needing to replace the entire product.
Easy to process
It can be cut, drilled, milled, planed and inlaid using standard tools.
Non-toxic
It does not release vapours when exposed to normal temperatures. When it burns, it releases carbon oxides only and the smoke does not contain toxic gases. It can be disposed of as domestic waste.
Coordinated
Soft lines suit all tastes, making it the star of the bathroom space.
Thanks to Tecnotek, the same material can be used for the basin and the unit top,
creating a unique, harmonious colour palette.
Available for top and top with built-in basin.
Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or sponge. Rinse withwarm water on a soft cloth and dry using a soft cloth.
STAINS OF HARD WATER SOAP OR MINERAL PRODUCTS
Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF® anti-limescale). Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.
OTHER STAINS MARKES, LIPSTIC, etc.
Clean using a non-abrasive ammonia detergent. Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.
PERSISTENT STAINS
Use an abrasive detergent (e.g. VIM®, AJAX®) on an abrasive sponge (e.g. SCOTCH-BRITE®). Rinse with warm water on a soft cloth and dry using a soft cloth.
G01 – White
Composite quartz tops are made using the exclusive Bretonstone® process, which makes them versatile, resistant, hygienic and easy to maintain. The aesthetic result is also second to none. The composite is made up of pure quartz, a structural resin and coloured pigments. The slabs are available with a glossy or matt Tatum finish. The built-in basin is carved out of the same solid slab, to create a single piece without any joints.
Available for top and top with built-in basin.
Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or sponge. Rinse withwarm water on a soft cloth and dry using a soft cloth.
STAINS OF HARD WATER SOAP OR MINERAL PRODUCTS
Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF® anti-limescale). Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.
OTHER STAINS MARKES, LIPSTIC, etc.
Clean using a non-abrasive ammonia detergent. Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.
PERSISTENT STAINS
Use an abrasive detergent (e.g. VIM®, AJAX®) on an abrasive sponge (e.g. SCOTCH-BRITE®). Rinse with warm water on a soft cloth and dry using a soft cloth.
D09 – Iceberg White
D10 – White
D11 – Breeze Blanc
D12 – Ashen Light
D15 – Light Beige
D13 – Hull
D14 – Black
E09 – Iceberg White
E10 – White
E11 – Breeze Blanc
E12 – Ashen Light
E15 – Light Beige
E13 – Hull
E14 – Black
Gres is created from a mixture of water and clay, which are transformed, via a process of extrusion, into a slab with exceptional mechanical properties. The transformation process of the raw clay makes the material more cohesive, obtaining a slab measur- ing 3 mm thick.
Available for top and top with built-in basin.
A process of vitrification then ensures the material is fully resistant to water and stains, as it closes the pores. Resistant to any substance, this material does not require any special maintenance. A neutral detergent diluted in water is rec- ommended for cleaning.
F01 – White
F02 – Black
F03 – Corten
F04 – Pearl Savoy Stone
F05 – Grey Savoy Stone
F06 – Anthracite Savoy Stone
Glass tops with a built-in basin have a thickness of 1.2 cm and are available in two finishes: glossy or satin. To install a glass top, use a non-acetic neutral silicone. For cleaning, use a standard, non-abrasive detergent or glass cleaner.
Available for top and top with built-in basin.
For cleaning, use special detergents for glass surfaces, which should be sprayed onto a microfibre glass cloth. In case of stains, especially dry, soften the stain with warm water and wipe with a soft cloth. Use lukewarm water and vinegar or water and denatured alcohol to remove all traces of halos.
A01/B01 – White
A22/B22 – Bromo Grey
A13/B13 – Dark Grey
A24/B24 – London Grey
A19/B19 – Dove Grey
A15/B15 – Black
A23/B23 – Brown
A35/B35 – Ocean
A37/B37 – Sauge
A38/B38 – Thym
A40/B40 – Cactus
A33/B33 – Face Powder
Forma tops are composed of resins and natural mineral fillers, guaranteeing high performance and making them ideal for any domestic or public use. Being extremely ductile, the same material can be used for the shower tray and the unit top, creating a unique, harmonious colour palette.
Offering standard or customisable sizing, flexible installation and excellent resistance to wear, this material is ideal for those looking to create a bathroom look to match the Hafro Forma shower tray range, in all of the various colourways.
Available for top and top with built-in basin.
The product is made with materials that allow for quick cleaning and hinder any bacteria deposits on the surface. Use specific products available on the market for cleaning. Use a soft cloth for all cleaning, never use abrasive wipes. Do not clean with alcohol, acids, nail polish or paint remover or other aggressive detergents. Do not use calcium oxide or hair dye, given the high concentration of methylene. The table in the catalogue shows the resistance characteristics of the various products.
L01 – White
L02 – Anthracite Grey
L03 – Concrete Grey
L05 – Beige
L06 – Land
L07 – Ice
Resistant
DuPont TM Corian® is easy to maintain and extremely durable. It does not split or flake. It tolerates daily use well and can with- stand most of the knocks, scratches and cuts to which surfaces in heavily used areas are subjected. Corian® has been tested to ascertain the mechanical, thermal, electrical and other properties of its surface. For the results of these specific tests and for more detailed information about its other physical properties, please consult the online datasheet at www.corian.it.
Hygienic
DuPontTM Corian® is a non-porous material. It is compact throughout and can be installed without any joins, making the surface extremely hygienic. Corian® surfaces do not allow fungi and bacteria to grow. Corian® has been certified by an independent laboratory as a hygienic material according to international standard DIN EN ISO 846.
Easy to repair
Surfaces in DuPontTM Corian® can be restored to their original beauty using a normal, mild, abrasive detergent and an abrasive sponge.
Non-toxic
Du- Pont TM Corian® is an inert and non-toxic material. It does not release gases when exposed to normal temperatures. When it burns, it releases carbon oxides only. The smoke it produces has a limited optical density and does not contain toxic halogenated gases.
Full-bodied colours
The colours and decorative patterns run through the full thickness of the material and are therefore not subject to wear. DuPontTM Corian® is a solid material and does not split or flake.
Invisible joins
Bonding is invisible with this material and the overall effect is that of a continuous surface without any joins.
Ecological
DuPont TM Corian® is produced in compliance with strict regulations to limit waste and energy consumption at every stage of the production process. The material, adhesives and sealants used for installation produce low emissions of volatile organic compounds (VOC) and have been certified as GREEN GUARD Indoor Air Quality Certified®.
Available for top and top with built-in basin.
The product is made with materials that allow for quick cleaning and hinder any bacteria deposits on the surface. Use specific products available on the market for cleaning.
To clean, use normal bathroom cleaning products such as, Cif® and Bleach. Do not use cleaning products containing solvents thinners, and turpentine. To remove any scratches caused by use and restore the original appearance of the surface simply smooth the surface with an abrasive sponge such as scotch-brite or thin abrasive paper and then polish using a soft cloth.
M01 – White
M02 – White Onix
M03 – Dune
M04 – Limestone
M05 – Cosmos
High pressure laminate (HPL) is an excellent quality material, thanks to its functional and aesthetic properties. It is resistant to wear and steam, hygienic and versatile to cut and assemble. This make it an ideal material for making furniture. HPL is also ideal for all applications requiring both strength and a great design, and there are various different types. It is the most reliable material in terms of quality, while also being rich in aesthetic features. It can also be used to create contemporary design accessories in general. HPL also maintains its aesthetic and performance characteristics unaltered throughout its life cycle.
It is made up of layers of cellulose fibres impregnated with phenolic resins and features one or more layers of cellulose fibre on the surface, for aesthetic purposes. This surface layer is impregnated with thermosetting resins and bonded together by a high-pressure process, in accordance with standard EN 438:2005. Natural variations in temperature and humidity do not alter the properties of HPL. Being especially compact, HPL ensures an excellent combination of mechanical characteristics such as resistance to bending, traction, compression and impact. The panels are smooth and even, and have a high density, guaranteeing excellent resistance when removing fasteners. A very high percentage of the raw materials used for its production are recyclable.
Available for top and top with built-in basin.
Use a soft (non-abrasive), damp cloth to remove any dust deposits, particles or other dry material, without scouring the surface.
Use a non-abrasive cleaning agent to clean all surfaces and dry with a dry, soft cloth or paper towels.
Do not use abrasive or scratching substances (abrasive cleaners, powders, scouring pads, descaling agents, hydrochloric or formic acid). Rinse with lukewarm water and dry without leaving halos.
If stains are still present, repeat the operation with liquid detergent and warm (not boiling) water, rinsing and drying the surface.
In case that dirt is deposited in the crevices, use a soft toothbrush: only go over the affected spot with gentle, circular movements so as not to scratch the surface.
Avoid pouring hot liquids into the sink.
In the case of persistent limescale, kitchen vinegar may be used on the affected area, leaving it for a maximum of a few minutes and rinsing immediately afterwards.
HP1 – Slavonian Oak
HP5 – Chestnut
HP6 – Egyptian Malta
HP7 – Dark Wood
This innovative finish combines the refined, resistant properties of glass with special slabs featuring an elegant glossy or matt marble effect. This new material allows you to create furniture with a simple, modern design. Use it to clad the Eclipse base units to create continuity.
The white Calacatta finish features the same delicate shades as the precious Italian Calacatta marble, while the black Marquinia flaunts the marked white vein of the prized Spanish marble going by the same name.
The unique feature of this unit in a white Calacatta or black Marquinia marble-effect finish is the continuous vein. Starting from the unit front, it extends to the sides and across the top, uninterrupted, to create a single element.
The Venezia finish, when applied to different combinations of base units, creates compositions that are truly unique.
For cleaning, use special detergents for glass surfaces, which should be sprayed onto a microfibre glass cloth. In case of stains, especially dry, soften the stain with warm water and wipe with a soft cloth. Use lukewarm water and vinegar or water and denatured alcohol to remove all traces of halos.
VL2 – Glossy Black Marquinia
VO2 – Matt Black Marquinia
VL1 – Glossy White Calacatta
VO1 – Matt White Calacatta
Veneering consists in covering chipboard panels with a thin sheet of fine wood known as veneer.
Available for top and bathroom furniture fronts.
For daily cleaning, use a soft or microfibre cloth slightly moistened with water.
For more thorough cleaning, use a soft cloth soaked in neutral, non-abrasive detergent and water. It is recommended to follow the natural grain of wood to ensure that dirt is removed from the pores and to always rinse the surface with a well-wrung cloth.
Dry all doors surfaces of the furniture unit after cleaning.
Never use alcohol, acetone, bleach, stain removers or ammonia.
Natural Oak
Suite bathroom furniture
Dark Oak
Suite bathroom furniture
White Ash
Suite bathroom furniture
Antique Oak
Change bathroom furniture
EL1 – Heat-Treated Oak
EL2 – Walnut
EL3 – Light Oak
Veneering consists in covering chipboard panels with a thin sheet of fine wood known as veneer.
Available for bathroom furniture top.
For daily cleaning, use a soft or microfibre cloth slightly moistened with water.
For more thorough cleaning, use a soft cloth soaked in neutral, non-abrasive detergent and water. It is recommended to follow the natural grain of wood to ensure that dirt is removed from the pores and to always rinse the surface with a well-wrung cloth.
Dry all doors surfaces of the furniture unit after cleaning.
Never use alcohol, acetone, bleach, stain removers or ammonia.
Natural Oak
Suite bathroom furniture
Dark Oak
Suite bathroom furniture
White Ash
Suite bathroom furniture
3D-effect melamine
Top-quality FSC-certified materials, which also comply with E1 regulations for V100 chipboard as regards formaldehyde content.
Millennium Finish
Inspired by soft red-pine wood. Red pine creates a smooth, even finish you can really feel. What makes Millennium stand out is the dominant mottle, which creates a great visual effect with different areas of matt and gloss. The overall result is a decorative finish with real impact.
Engadina Finish
Engadina is a new, elegant finish with a vintage twist, which reinterprets the typical grain of sandblasted spruce wood, in a wide range of colours. This finish has a retro, pleasantly evocative edge, which maintains distinctive Cleaf style for traditional modules, in a perfectly contemporary vision.
Sherwood Finish
This surface finish is full of character, inspired by the oak trees of the Po valley. With deep, bold markings, Sherwood expresses the full force of nature. The shades selected by the Cleaf Research Lab allow Sherwood to be used both in traditional and contemporary spaces, for furniture, panelling and other installations for which stylish details are sought for the visuals and textures.
Ares Finish
Inspired by the urban wall designs found in industrial architecture, the Ares finish reproduces the simplicity and depth of a concrete or plastered wall.
Available for top and bathroom furniture fronts.
Melamine surfaces are easy to clean and require no special maintenance.
Use a damp cloth with warm water and then dry with a soft, clean cloth.
For persistent stains we recommend a sponge with a laminate cleaner or glass cleaner. Conclude cleaning by wiping the surface with a dry cloth to avoid halos.
The melamine surface must never be treated with steel wool pads or products containing abrasive creams or powder detergents. Never use cleaning agents containing acids such as formic acid descaling agents, hydrochloric acid, bleach.
MI1 – White
EN1 – Light Grey
EN2 – Dark Grey
SH1 – Honey
SH2 – Tobacco
RS1 – White
RS2 – Grey
RS3 – Mink
RS4 – Graphite
The Geromin Group offers a range of matt and glossy lacquered colours. In addition to these, customers can opt to to customise their colour choice to personalise the bathroom space. Geromin is also environmentally conscious and uses water-based lacquers for its products.
Available for top and bathroom furniture fronts.
Remove excess dust or dirt stains with a soft microfibre cloth using mild detergents or specific detergents for lacquered surfaces.
Never use abrasive sponges, ammonia, corrosive products, bleach and limescale removers, as they may irreversibly damage the lacquer.
Always rinse all surfaces and dry them immediately with a microfibre cloth (air drying is not recommended).
A01/B01 – White
A17/B17 – Ice
A26/B26 – Cashmere
A20/B20 – Efeso Grey
A41/B41 – Air
A22/B22 – Bromo Grey
A15/B15 – Black
A25/B25 – Cosmic Grey
A24/B24 – London Grey
A43/B43 – Mud
A42/B42 – Sand
A45/B45 – Ecrù
A44/B44 – Straw
A49/B49 – Sunflower
A47/B47 – Safari
A46/B46 – Brick
A48/B48 – Bordeaux
A50/B50 – Dolomite
A51/B51 – Antique Pink
A52/B52 – Glycine
A53/B53 – Midnight Blue
A54/B54 – Colibrì
A55/B55 – Agave
A56/B56 – Sugar Paper
A37/B37 – Sauge
A57/B57 – Baltic
A59/B59 – Lagoon
A58/B58 – Artic
A39/B39 – Mint
A62/B62 – Aloe
A61/B61 – Sea
A60/B60 – Pine
A63/B63 – Forest Green
A64/B64 – Jungle
A38/B38 – Thym
A65/B65 – Swamp
A67/B67 – Leaf
A66/B66 – Bambou
Fill in the form for any further information about our products