Tecnotek Flat Plus
Tecnotek shower tray with extra size and matching drain cover
A LARGE SHOWER TRAY TO GIVE MORE SPACE FOR WELL-BEING.
Tecnotek Flat Plus shower tray extends to a length of 240 cm: an extra size to give more space for your moments of well-being.
Flat Plus is a Tecnotek shower tray, a material composed of acrylic resins, which is durable and antibacterial and well suited to be processed in various shapes and with custom cuts.
MATCHING SHOWER TRAY AND DRAIN COVER IN THE SAME TECNOTEK FINISH.
CUT TO SIZE
Custom processing allows for custom cutting and shaping to adapt the shower tray to any project, integrating it into every space.
TECHNICAL DATA SHEET
DESCRIPTION
Tecnotek FLAT PLUS – Tecnotek FLAT PLUS with rim
Tecnotek is a prestige material made up 100% of acrylic resins that makes it possible to create shower trays in various shapes. By using Tecnotek, you can have the same material for the tray as for the top of the units in your bathroom, which creates a single, inimitable chromatic harmony.
Standard sizes and made to measure
FEATURES
Easy to clean
Antibacterial
Customisable and adaptable to space
Non-toxic
New generation drain with high evacuation
INSTALLATION
Floor installation - Flush-floor installation - On the finished floor
CONFIGURATIONS
L da 200 a 240
L1 da 70 a 100
H 2.5 cm
Square cut
Oblique cut
Curved cut
Cutting length (L)
Cut A
Cutting depth (L1)
Cut B
Cutting depth (L1)
Cut C
Cutting depth (L1) for 2 sides
FINISHES
G01 – White
G02 – Cream
G03 – Earth
G04 – Light Grey
G05 – Dark Grey
DAILY MAINTENANCE
GENERAL MAINTENANCE: Clean the surface using warm water and a mild detergent on a soft damp, non-abrasive, cloth or sponge.
Rinse with warm water on a soft cloth and dry using a soft cloth.
STAINS OF HARD WATER SOAP OR MINERAL PRODUCTS: Clean using a descaling detergent (e.g. vinegar, VIAKAL®, CIF® descaler).
Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.
OTHER STAINS MARKES, LIPSTIC, ETC.: Clean using a non-abrasive ammonia detergent.
Rinse with warm water on a soft, non-abrasive cloth and dry using a soft cloth.
STUBBORN STAINS: Use an abrasive detergent (e.g. VIM®, AJAX®) on an abrasive sponge (e.g. SCOTCH-BRITE®).
Rinse with warm water on a soft cloth and dry using a soft cloth.
DOWNLOADS
Fill in the form for any further information about our products