Materiali Saunes

Abachi
Sauna wood Sauna Vita®
TECHNICAL DATA SHEET

DESCRIPTION

A wood extremely resistant against temperature changes and with zero thermal conductivity.

SAUNAS USE

Olimpo: interior and furniture, Abachi with horizontal beads
Ethos: interior and furniture, Abachi
Ethos C / Ethos L / Ghibli Sauna: interior and furniture, Abachi with horizontal beads
Cuna / Cuna Doccia / Kyra: furniture, Abachi

CLEANING

Do not, under any circumstances, treat sauna wooden walls with paint or similar, as the wood would lose its athermic qualities and could cause burns if it is exposed to the skin. Steel parts should only be cleaned with a soft cloth soaked in alcohol. Never use washing powder, acetone, ammonia or products based on these substances, as they will irreversibly damage the glass. Glass parts should only be cleaned with specific products available on the market. Do not use products containing formic acid or formaldehyde to clean glass surfaces. After each use, it is advisable to clean the platforms and benches. Cleaning products containing solvents such as trichloroethylene and thinners should never be used.

Cleaning of steel parts:
Use a soft cloth for all operations and never abrasive wipes.
Use a soft cloth soaked in alcohol to clean these parts.
Never use powder detergents.

Cleaning of glasses:
Clean the glasses after each use to prevent limescale build-up. Carefully read the detergent product labels to avoid damaging surfaces.
Do not use corrosive or abrasive Chlorine, Active Oxygen, Acid or Soda-based products.
Use only mild or natural cleaning products such as vinegar.
Rinse well with lukewarm water.
Dry glass and metal parts with delicate sponges, soft cloths or squeegees. Vent the shower enclosure to prevent any mould from forming inside, especially if the cubicle is closed.

ABACHI WOOD

Vedi tutta la galleria
Spruce / Knotted Spruce
Wood for Sauna Vita® Saunas
TECHNICAL DATA SHEET

DESCRIPTION

Spruce
A scented wood is used to create natural and extremely relaxing settings.

Knotted Spruce
The knots of the spruce wood the authenticity of the material and the naturalness of the sauna.

SAUNAS USE

Talia: Spruce interior, exterior and furniture
Kyra: Knotted spruce for interior and exterior

CLEANING

Do not, under any circumstances, treat sauna wooden walls with paint or similar, as the wood would lose its athermic qualities and could cause burns if it is exposed to the skin.
Steel parts should only be cleaned with a soft cloth soaked in alcohol.
Never use washing powder, acetone, ammonia or products based on these substances, as they will irreversibly damage the glass. Glass parts should only be cleaned with specific products available on the market.
Do not use products containing formic acid or formaldehyde to clean glass surfaces.
After each use, it is advisable to clean the platforms and benches.
Cleaning products containing solvents such as trichloroethylene and thinners should never be used.

Cleaning of steel parts
Use a soft cloth for all operations and never abrasive wipes.
Use a soft cloth soaked in alcohol to clean these parts.
Never use powder detergents.

Cleaning of glasses
Clean the glasses after each use to prevent limescale build-up. Carefully read the detergent product labels to avoid damaging surfaces.
Do not use corrosive or abrasive Chlorine, Active Oxygen, Acid or Soda-based products.
Use only mild or natural cleaning products such as vinegar.
Rinse well with lukewarm water.
Dry glass and metal parts with delicate sponges, soft cloths or squeegees.
Vent the shower enclosure to prevent any mould from forming inside, especially if the cubicle is closed.

SPRUCE WOOD

Vedi tutta la galleria
Hemlock
Wood for Sauna Vita® Saunas
TECHNICAL DATA SHEET

DESCRIPTION

A fine, knot-free, and resistant wood with a warm colour. Hemlock ensures extreme thermal insulation.

SAUNAS USE

Kalika: Sauna exterior and interior sauna platform (for Kalika sauna interior see materials Hemlock + Heat-treated ash wood)
Cuna / Cuna Doccia / Kyra: Sauna interior and exterior

CLEANING

Do not, under any circumstances, treat sauna wooden walls with paint or similar, as the wood would lose its athermic qualities and could cause burns if it is exposed to the skin.
Steel parts should only be cleaned with a soft cloth soaked in alcohol.
Never use washing powder, acetone, ammonia or products based on these substances, as they will irreversibly damage the glass. Glass parts should only be cleaned with specific products available on the market.
Do not use products containing formic acid or formaldehyde to clean glass surfaces.
After each use, it is advisable to clean the platforms and benches.
Cleaning products containing solvents such as trichloroethylene and thinners should never be used.

Cleaning of steel parts
Use a soft cloth for all operations and never abrasive wipes.
Use a soft cloth soaked in alcohol to clean these parts.
Never use powder detergents.

Cleaning of glasses
Clean the glasses after each use to prevent limescale build-up. Carefully read the detergent product labels to avoid damaging surfaces.
Do not use corrosive or abrasive Chlorine, Active Oxygen, Acid or Soda-based products.
Use only mild or natural cleaning products such as vinegar.
Rinse well with lukewarm water.
Dry glass and metal parts with delicate sponges, soft cloths or squeegees.
Vent the shower enclosure to prevent any mould from forming inside, especially if the cubicle is closed.

HEMLOCK WOOD

Vedi tutta la galleria
Hemlock + Heat-treated ash wood
Wooden interior slats for Kalika sauna
TECHNICAL DATA SHEET

DESCRIPTION

The thermal treatment of ash wood improves its durability, which adds to the Hemlock’s resistance.
Hemlock is a fine, knot-free, and resistant wood with a warm colour. Hemlock ensures extreme thermal insulation.

SAUNAS USE

Kalika: Sauna interior slats

CLEANING

Do not, under any circumstances, treat sauna wooden walls with paint or similar, as the wood would lose its athermic qualities and could cause burns if it is exposed to the skin.
Steel parts should only be cleaned with a soft cloth soaked in alcohol.
Never use washing powder, acetone, ammonia or products based on these substances, as they will irreversibly damage the glass. Glass parts should only be cleaned with specific products available on the market.
Do not use products containing formic acid or formaldehyde to clean glass surfaces.
After each use, it is advisable to clean the platforms and benches.
Cleaning products containing solvents such as trichloroethylene and thinners should never be used.

Cleaning of steel parts
Use a soft cloth for all operations and never abrasive wipes.
Use a soft cloth soaked in alcohol to clean these parts.
Never use powder detergents.

Cleaning of glasses
Clean the glasses after each use to prevent limescale build-up. Carefully read the detergent product labels to avoid damaging surfaces.
Do not use corrosive or abrasive Chlorine, Active Oxygen, Acid or Soda-based products.
Use only mild or natural cleaning products such as vinegar.
Rinse well with lukewarm water.
Dry glass and metal parts with delicate sponges, soft cloths or squeegees.
Vent the shower enclosure to prevent any mould from forming inside, especially if the cubicle is closed.

WOOD SLATS

Cedar
Wood for Sauna Vita® Saunas
TECHNICAL DATA SHEET

DESCRIPTION

The natural scent of the cedar is spread all over the sauna.

SAUNAS USE

Kalika: Sauna exterior (for Kalika sauna interior see materials Cedar + Heat-treated ash wood)

CLEANING

Do not, under any circumstances, treat sauna wooden walls with paint or similar, as the wood would lose its athermic qualities and could cause burns if it is exposed to the skin.
Steel parts should only be cleaned with a soft cloth soaked in alcohol.
Never use washing powder, acetone, ammonia or products based on these substances, as they will irreversibly damage the glass. Glass parts should only be cleaned with specific products available on the market.
Do not use products containing formic acid or formaldehyde to clean glass surfaces.
After each use, it is advisable to clean the platforms and benches.
Cleaning products containing solvents such as trichloroethylene and thinners should never be used.

Cleaning of steel parts
Use a soft cloth for all operations and never abrasive wipes.
Use a soft cloth soaked in alcohol to clean these parts.
Never use powder detergents.

Cleaning of glasses
Clean the glasses after each use to prevent limescale build-up. Carefully read the detergent product labels to avoid damaging surfaces.
Do not use corrosive or abrasive Chlorine, Active Oxygen, Acid or Soda-based products.
Use only mild or natural cleaning products such as vinegar.
Rinse well with lukewarm water.
Dry glass and metal parts with delicate sponges, soft cloths or squeegees.
Vent the shower enclosure to prevent any mould from forming inside, especially if the cubicle is closed.

CEDAR WOOD

Vedi tutta la galleria
Cedar + Heat-treated ash wood
Wooden interior slats for Kalika sauna
TECHNICAL DATA SHEET

DESCRIPTION

The natural scent of the cedar is spread all over the sauna.
The heat-treated ash wood provides further resistance.

SAUNAS USE

Kalika: Sauna interior slats

CLEANING

Do not, under any circumstances, treat sauna wooden walls with paint or similar, as the wood would lose its athermic qualities and could cause burns if it is exposed to the skin.
Steel parts should only be cleaned with a soft cloth soaked in alcohol.
Never use washing powder, acetone, ammonia or products based on these substances, as they will irreversibly damage the glass. Glass parts should only be cleaned with specific products available on the market.
Do not use products containing formic acid or formaldehyde to clean glass surfaces.
After each use, it is advisable to clean the platforms and benches.
Cleaning products containing solvents such as trichloroethylene and thinners should never be used.

Cleaning of steel parts
Use a soft cloth for all operations and never abrasive wipes.
Use a soft cloth soaked in alcohol to clean these parts.
Never use powder detergents.

Cleaning of glasses
Clean the glasses after each use to prevent limescale build-up. Carefully read the detergent product labels to avoid damaging surfaces.
Do not use corrosive or abrasive Chlorine, Active Oxygen, Acid or Soda-based products.
Use only mild or natural cleaning products such as vinegar.
Rinse well with lukewarm water.
Dry glass and metal parts with delicate sponges, soft cloths or squeegees.
Vent the shower enclosure to prevent any mould from forming inside, especially if the cubicle is closed.

WOOD SLATS

Vedi tutta la galleria
Request information

Fill in the form for any further information about our products